利用API函数[mciSendString]可以轻松实现MP3音乐文件的播放。

正在装载数据……

下面这段程序实现了MP3播放的大部分常规操作，对其稍加修改，做一个100KB大小的MP3播放器轻而易举

启动VB程序，在窗体上放置6个命令按钮，三个标签，一个公用对话框、一个进度条、一个状态栏和一个计时器，窗本的布置请参考附图

按钮"Open MP3 File"是用来打开对话框选择MP3文件，其他5个按钮分别为Play(播放)、Pause(暂停)、Stopplay(停止播放)、Back(向后跳跃)、Prew(向前跳跃)。Label1用来表示歌曲当前时间；label2放在时度条的最左边，Caption属性为"00：00"；lable3放在时度条的右边，用来表示歌曲总长。

下面就可以编写代码了。首先在窗体的"通用声明"部分声明函数
Private Declare Function mciSendString Lib "winmm.dll" Alias "mciSendStringA"(Byval lpstrCommand As String,ByVal lpstrRetumString As String,ByVal uReturnLength As long,ByVal hwndCallback as long) As long

Dim mfn As String

下面就是各个对象的代码了：
Private Sub Form_load()
mfn=""
play.Enabled=False
pause.Enabled=False
Stopplay.Enabled=False
back.Enabled=False
divw.Enabled=False
Timer1.Enabled=False
Timer1.Interval=500
End Sub

Private Sub open_Click()
On Error Goto err
With CommonDialog1
.CancelError=True
.Filter="音乐文件|*.mp3;*.wav;*.mid"
.Flags=cdlOFNNoChangeDir And cdlOFNPathMustExist
.Action=1
stopplay_Click '停止按钮同时可以设备初始化
mfn=.FileName '这个程序中文件名一定不能带空格
Form1.Caption=.FileName
play.Enabled=True
End With
play_Click
Exit Sub
err:
End Sub

Private Sub play_Click()
On Error Resume Next
Dim t As Long
t=mciSendString("open " + mfn,0&,0,0) 'Open后边的空格一定不能丢
Dim ret As String * 128
t=mciSendString("status " + mfn + " length",ret,128,0)
'显示歌曲总长
ret=Left(ret,8)
If ret<>"" Then
ProgressBar1.Min=0
ProgressBar1.Max=Val(ret)
Label3.Caption=gettime(Val(ret))
End If
play.Enabled=False
pause.Enabled=True
stopplay.Enabled=True
back.Enabled=True
divw.Enabled=True
t=mciSendString("status " + mfn +" mode",ret,128,0)
'得到设备的当前状态，是播放还是暂停等等
ret=Left(ret,8)
StatusBar1.Panels(1).text=ret
'在状态栏显示播放状态
t=mciSendString("play " + mfn + " form " + Str(ProgressBar1.Value),0&,0,0)
'开始播放
Timer1.Enabled=True
End Sub

Private Sub pause_Click()
t%=mciSendString("pause " + mfn,0&,0,0)
'发出暂停的命令
play.Enable=True
pause.Enabled=False
stopplay.Enabled=True
back.Enabled=False
divw.Enabled=False
End Sub

Private Sub stopplay_Click()
t%=mciSendString("stop " + mfn,0&,0,0)
t%=mciSendString("close " + mfn,0&,0,0)
'停止播放
play.Enabled=True
pause.Enabled=False
stopplay.Enabled=False
back.Enabled=False
divw.Enabled=False
End Sub

Private Sub back_Click()
t%=mciSendString("play " + mfn + " from " + Str(ProgressBar1.Value-(ProgressBar1.Max\10)),0&,0,0) '向后跳一小段再播放
End Sub

Private Sub divw_Click()
t%=mciSendString("play " + mfn + " from " + Stri(ProgressBar1.Value+(ProgressBar1.Max\10)),0&,0,0) '向前跳一小段再播放
End Sub

Private Sub Timer1_Timer()
Dim t As Long
Dim ret As String * 128
t=mciSendString("status " + mfn + " position",ret,0,0)
'得到当前播放位置
ret=left(ret,8)
ProgressBar1.Value=Val(ret)
Label1.Caption=gettime(Val(ret))
'显示歌曲当前时间
If ProgressBar1.Value=ProgressBar1.Max Then
stopplay_Click
End If
t=mciSendString("status " + mfn + " mode",ret,128,0)
ret=Left(ret,8)
StatusBar1.Panels(1).Text=ret
End Sub

Private Sub Form_Unload(Cacel As Integer)
t%=mciSendString("stop " + mfn,0&,0,0)
t%=mciSendString("close " + mfn,0&,0,0)
End Sub

Private Function Gettime(position As Long) As String
'这个函数的功能是把以长整型表示的时间转换为电子钟式的"**:**"
Dim min,sec
min=position/1000
min=min/60
sec=min-Int(min)
min=Int(min)
sec=60 * sec / 100
sec=Int(sec * 100)
gettime=Str(min) + ":" + Str(sec)
End Function

图中5个控制按钮，其实是把字体设为"Webdings"，让它们的Caption属性分别为"4" ";" "<" "7" "8"
就可以了